一、

Product name ：

CP2080 drive comprehensive performance tester

二、

Model ：

CP2080

三、

Quantity ：

1 set

四、

Product characteristic：

1. Instrument input and output signals can be AC or DC，also AC and DC at the same time .

2.Input and output current test frequency response 1MHz, to accurately measure the various types of LED drive power

3. Input and output analog circuits，Digital processing circuits are isolated from each other,Not only greatly improve the instrument's anti-jamming capability, but also greatly reduces the measurement instrument to drive the power of the normal work of the interference

4.Eight windows at the same time show the input characteristics, the output characteristics of the parameters for easy comparison, analysis

5.Testing speed, 0.1 seconds to achieve the input.Output parameters of the test, especially for development and on-site test.

6. Provide HANDLER connector，In order to connect with external devices to accommodate large-scale rapid detection

7. Provide RS-232 connector，can communicate with PC，provide Dedicated software ,running on windows2000，windows XP

Windows7 ,in English and Chinese ，Display all data and waveform, and provide Chinese and English software. Beautiful interface, easy to operation.

五、

Instrument functions ：

1.

Input characteristic test (AC）

A Measurement of input voltage, current, power, power factor, grid frequency, total harmonic and 0 ~ 50 times, each harmonic content, peak ratio, initial phase angle, peak phase angle and cutoff phase angle.

B Voltage,Current base frequency range：45Hz~65Hz:

Narrow frequency range：45Hz~5kHz         Narrow frequency range：45Hz~1MHz

C Voltage range ：0~300V（CF=1.67)：

 Current range ：5mA~2.7A (CF=3):

 Power range ：0.015~800W：

 Power factor range ：0.000~+1.00：

2.

Input characteristic test (DC)

A Measurement of input voltage, current, power：

B Voltage range：0~500V：

  Current range：5mA~8A:

  Power range ：0.015~4000W：

3.

Output characteristic test (AC)

A Measurement voltage, current, power：

B Voltage range ：0~300V（CF=3)：

  Current range ：5mA~2.7A CF=3):

  Power range ：0.015~800W：

4.

Output  characteristic test (DC）

A Measurement of input voltage, current, power:

B Voltage range ：3~500V：

  Current range ：5mA~8A:

  Power range ：0.015~5000W：

  Ripple Current Range：1mA~205A 

5.

Output Start-up Characteristic Test (DC)

A Measurement of lamp voltage, lamp current of 0 ~ 2 seconds curve and data:

B Voltage range ：0~500V

C Current range ：5mA~8A